China 6.2 inch 800×480 RGB 60pin 500nit TN TFT LCD Module Manufacturer, Manufacturers
View Specifications
Primary Engineering Series
High-Performance TFT LCD Modules (Part I)
Explore standard, wide-temperature, and custom optoelectronic configurations engineered directly by Shenzhen Xunrui Optoelectronics for global mission-critical hardware deployments.
China 2 inch 240×320 SPI 30PIN 250nit IPS TFT LCD Module Manufacturer, Suppliers
View Specifications
Custom 5 inch 480×854 RGB 40pin 1000nit IPS TFT LCD Module Manufacturer, Manufacturers
View Specifications
China 5 inch 480×272 RGB 40pin interface 350nit TN TFT LCD module Manufacturer, Factory
View Specifications
China 4.3 inch 800×480 IPS TFT LCD Module with capacitive touch panel Manufacturer, Suppliers
View Specifications
Custom 9 inch TFT LCD Module 1024×600 LVDS 60pin 400nit IPS Screen Suppliers, Factory
View Specifications
Custom 8 inch TFT LCD module 800×1280 MIPI 31pin interface 480nit IPS screen Suppliers, Factories
View Specifications
China 7 inch 800×480 1000nit Wide Operating Temperature Range TN TFT LCD Display Manufacturer, Manufacturers
View Specifications
Technical Architecture White Paper
Engineering Anatomy of the 6.2-Inch TFT LCD Module Ecosystem
An in-depth technical analysis covering electro-optical architectures, interface signaling, backlight driving topologies, and environmental tolerance for mid-format display panels.
Optical Polarizer & LC Alignment
The standard 6.2" format utilizes advanced liquid crystal modes balancing Twisted Nematic (TN) high-response parameters and In-Plane Switching (IPS) ultra-wide viewing angles (80/80/80/80). Optical films and anti-glare (AG) hard-coatings (3H surface hardness) prevent specular glare, reducing operator fatigue in ambient outdoor or control-room setups.
Differential Signaling & RGB 60-Pin Bus
Operating typically on a dedicated RGB 24-bit 60-pin parallel or low-voltage differential signaling (LVDS) bus, the display preserves pixel timing integrity up to 800×480 WVGA resolution at 60 Hz. The FPC circuitry integrates differential ground shields and impedance matching (50Ω single-ended / 100Ω differential) to suppress EMI in motor-driven machinery.
Backlight Luminescence & Thermal Balance
Engineered with matrix edge-lit white LED arrays generating from 350 to over 1000 nits, the illumination engine is optimized for high candela-per-watt efficiency. Integrated thermal dissipation substrates prevent localized hotspot formation, safeguarding LED forward-voltage stability and extending backlight half-life beyond 50,000 operating hours.
Localized Application Matrix
Engineered for Demanding Industrial & Commercial Environments
From smart agricultural cabs to marine nav-stations and ruggedized field test units, 6.2-inch modules fill the ergonomic sweet spot between compact handheld displays and bulky operator panels.
Automotive & Fleet Telematics
Integrated within 2-DIN dashboard systems, off-highway machinery consoles, and commercial fleet telematics. Sunlight readability (≥800 nits) and anti-vibration structural bonding protect visual data during rough hauling.
Clinical & Diagnostic Diagnostics
Infusion workstation controllers, blood gas analyzers, and mobile bedside monitors require vivid WVGA resolution for real-time waveform tracking. Antibacterial optical bonding resists harsh chemical washdowns.
Factory Automation HMIs
Serving as the interface for programmable logic controllers (PLCs), CNC controllers, and robotic teaching pendants. Pairable with 4-wire resistive touch panels for flawless operation with oily or gloved hands.
Smart Access & Biometrics
Rugged exterior intercoms, commercial turnstiles, and fingerprint/facial verification gates require 24/7 continuous duty cycles, IK08 vandal-resistant cover glass, and operating spans from -20°C to +70°C.
Parametric Standards
Electro-Optical Comparison: Standard vs. Enhanced Configurations
Comprehensive engineering specifications guiding hardware selection between traditional Twisted Nematic and customized high-performance In-Plane Switching 6.2-inch assemblies.
| Specification Parameter | Standard Commercial (TN) | Industrial High-Bright (IPS) | Ultra-Ruggedized Custom Build |
|---|---|---|---|
| Active Diagonal / Ratio | 6.2 Inch (16:9 Wide) | 6.2 Inch (16:9 Wide) | 6.2 Inch (Custom Cover Lens Cutout) |
| Native Resolution | 800 × 480 (WVGA) | 800 × 480 / 1024 × 600 Options | 800 × 480 Enhanced Pixel Density |
| Luminance (Nits) | 350 – 500 cd/m² | 800 – 1000 cd/m² (Sunlight Readable) | 1200+ cd/m² with Optical Bonding |
| Viewing Angle (U/D/L/R) | 50/70/70/70 (Contrast Degraded) | 85/85/85/85 Full Symmetry (IPS) | 89/89/89/89 IPS Pro + Polarizing Film |
| Signaling Interface | RGB 24-bit (60-Pin FPC) | RGB 24-bit / 4-lane MIPI / LVDS | Custom FPC with Differential Shielding |
| Operating Temperature | -20°C to +70°C | -30°C to +80°C (Extended) | -30°C to +85°C (Automotive Qualified) |
| Touch Sensor Stack | 4-Wire Resistive (RTP) | Projected Capacitive (PCAP, I²C/USB) | Optical Bonded PCAP (Glove & Water Rejection) |
| Compliance Verification | RoHS / REACH | ISO 9001 / ISO 14001 | Automotive Grade AEC-Q100 |
Supply Chain Excellence
China Direct Manufacturing: Scalability, Cost Efficiency & BOM Stability
Shenzhen Xunrui Optoelectronic Technology Co., Ltd. delivers distinct supply chain advantages, eliminating middleman markups and mitigating global sourcing disruptions.
Shenzhen Industrial Ecosystem
Situated within Bao'an District, our manufacturing operations tap directly into the world’s most concentrated optoelectronics ecosystem. Raw glass, driver ICs, polarizers, and precision tooling are sourced within a 30-kilometer radius, drastically reducing component lead times and enabling rapid iterative prototyping.
Rigid 5-Stage Cleanroom Quality Gates
Zero-defect commitments are backed by ISO 9001 and ISO 14001 protocols. Each production run undergoes: (1) IQC Incoming Material Screening, (2) Cleanroom Glass Laser Inspection, (3) Automated FOG (Film-on-Glass) Bonder Testing, (4) 100% Thermal Burn-in Aging, and (5) OQC Pre-Shipment Optical Verification.
Flexible Volume Batching & Longevity
Industrial programs demand longevity. We support products with guaranteed 5- to 7-year life cycles and formal EOL transition management. Overseas OEM clients benefit from 5 to 500 pcs pilot batch runs for field testing before executing full production orders (>1,000 pcs MOQ).
Engineering Methodology
Gate-Controlled Customization Workflow
A deterministic development methodology ensuring zero misalignment from your mechanical CAD enclosure drawings down to signal protocol firmware integration.
Optical & Form Fit Assessment
Detailed review of dimensional constraints, thermal exposure, ambient illumination conditions, and driver board signaling compatibility.
2D/3D CAD Drawing Sign-Off
Delivery of comprehensive engineering drawings outlining active area, mechanical tolerances, FPC pin mapping, and touch sensor stackup.
Rapid Prototyping & Tooling
Precision tooling creation, sample fabrication, and delivery of operational samples within verified turn-around windows for bench testing.
Validation Trial (5–500 Pcs)
One-time pilot assembly to validate SMT production compatibility, enclosure tolerances, and EMI compliance in real-world environments.
Automated Mass Production
Automated cleanroom manufacturing scaled past 1,000 units with unified BOM controls, automated visual inspection, and continuous aging tests.
Global Logistics & Lifecycle Care
Shockproof export packaging, comprehensive batch documentation, continuous supply continuity, and direct FAE engineer support.
Extended Engineering Series
High-Performance TFT LCD Modules (Part II)
Comprehensive display solutions spanning ultra-compact handhelds to wide 10.1-inch industrial operator interfaces with integrated touch sensors.
Custom 2.8 inch 240×320 TN TFT LCD Module with resistive touch panel Manufacturers, Supplier
View Specifications
China 4.3 inch 800×480 1000nit High brightness IPS TFT LCD module Supplier, Factory
View Specifications
Custom 5 inch 480×272 TN TFT LCD Module with resistive touch panel Manufacturers, Factory
View Specifications
China 2.8 inch TN TFT LCD module 240×320 RGB 40pin interface 250nit Manufacturers, Suppliers
View Specifications
Custom 2 inch 176×220 MCU 45pin interface 220nit TN TFT LCD Module Supplier, Suppliers
View Specifications
Custom 10.1 inch 1024×600 TN TFT LCD display with resistive touch panel Supplier, Suppliers
View Specifications
China 7 inch 800×480 RGB 40pin 450nit TN TFT LCD Display Manufacturers, Suppliers
View Specifications
Custom 4.3 inch 480×272 TN TFT LCD display with resistive touch panel Supplier, Factory
View Specifications
Assurance & Governance
International Regulatory Compliance & Field Engineering Support
Ensuring frictionless market access for European, North American, and Asia-Pacific industrial equipment manufacturers.
RoHS, REACH & Conflict Mineral Audits
Every raw material component—from glass substrate coatings to internal FPC solder flux—complies strictly with EU RoHS Directive 2011/65/EU and REACH (EC 1907/2006). Complete chemical composition declarations and material safety dossiers are provided on project sign-off.
Electromagnetic Compatibility (EMC/EMI)
Display modules are pre-screened to meet EN 55032 Class B radiated emissions and EN 61000-4-2 Level 4 electrostatic discharge (ESD) immunity standards (±8kV contact, ±15kV air discharge). We design custom shielding cans and ground beads into the FPC to ensure first-pass test success.
Dedicated FAE & Driver Adaptation
Hardware teams receive hands-on Field Application Engineer (FAE) backing. We provide direct guidance on Linux/Android kernel framebuffer drivers, init-code tuning for SSD1963, ST7262, and EK9716 driver ICs, alongside adapter bridge boards (HDMI, VGA, USB, MCU-to-RGB).
Procurement Knowledge Base
Frequently Asked Questions on 6.2" TFT LCD Modules
Authoritative technical insights answering the most critical sourcing, optical, and hardware integration inquiries from tier-1 equipment designers.
What is the standard pinout and interface architecture for a 6.2" TFT LCD?
The vast majority of 6.2-inch TFT LCDs, such as the 800×480 WVGA standard, utilize a 60-pin parallel RGB interface (supporting 16-bit, 18-bit, or 24-bit color depth). These pins allocate dedicated paths for data lines (R0–R7, G0–G7, B0–B7), clock synchronization (DCLK), data enable (DE), horizontal/vertical synchronization (HSYNC/VSYNC), as well as power supply rails (VDD, VGH, VGL, AVDD) and integrated LED backlight cathode/anode loops. Custom LVDS and MIPI adapter lines are available.
How does Xunrui achieve sunlight readability on outdoor 6.2" panels?
Sunlight readability is attained via two primary methods: high-efficiency LED matrix overdriving and optical bonding. Backlights are engineered to produce 800 to 1,000+ nits of brightness while managing thermal dissipation. Additionally, full optical bonding (OCA/LOCA) eliminates the internal reflective air gap between the TFT polarizer and the protective cover glass, drastically cutting internal reflectance below 1.5% and preserving contrast under intense direct sunlight.
What is the minimum order quantity (MOQ) and sample lead time?
Standard catalog samples are stocked in our Shenzhen warehouse and typically ship within 3 to 5 business days. For customized modules requiring unique FPC layouts, specialized backlight designs, or custom glass cover plates, initial tooling takes roughly 15 to 20 working days. Following initial sample sign-off, we accommodate pilot verification runs of 5 to 500 units before proceeding to custom mass production with an MOQ starting at 1,000 pieces.
Can the touch panel accommodate wet finger, glove, and salt-spray operations?
Yes. By pairing our projected capacitive (PCAP) sensors with specialized industrial touch controller ICs (such as Ilitek, Goodix, or EETI), we tune firmware algorithms to support high-noise rejection. The touch surface reliably tracks inputs across thick industrial gloves (≤5mm latex or leather), wet surfaces with pooling water droplets, and conductive saline mist common in marine or clinical environments.
How does Xunrui protect industrial programs from component obsolescence?
We maintain strict long-term roadmaps designed specifically for industrial OEM buyers. We select glass substrates, driver ICs, and polarizers from stable foundry lines to guarantee minimum 5- to 7-year continuous availability. If a key sub-component approaches end-of-life (EOL), we issue formal advance notice 6 to 12 months ahead, alongside drop-in replacement designs requiring zero PCB redesign on your carrier hardware.
Can you supply driver boards with HDMI, USB, or composite inputs?
Yes. Xunrui designs and manufactures matching AV, VGA, HDMI, and USB driver boards configured precisely to our display timings. These controller solutions include integrated backlight boost converters, EDID auto-negotiation, multi-language on-screen display (OSD) button interfaces, and plug-and-play USB touch controllers recognized natively by Windows, Linux, Android, and macOS systems.